Politique de retour sous 30 jours. En savoir plus

Cliquez ici pour nous contacter.

SPARECRUX is NOT an authorized distributor for FESTO

552787 | FESTO | ISO Cylinder CRDSNU-12-100-P-A-MQ-A1

₹ 15,993.31

₹ 13,553.65 (Excl. Tax)

Garantie

Nous offrons une garantie d'un an à compter de la date d'achat pour les produits neufs. De plus, les articles excédentaires ou d'occasion bénéficient d'une garantie de 30 jours .

Livraison et expédition

Nous traitons les commandes sous 5 à 7 jours ouvrés . Les options d'expédition varient selon la destination, avec suivi fourni. L'expédition internationale est disponible, les droits de douane étant à la charge du client.

Enquire Now
Interested in this product? Submit your enquiry by entering your details.

Numéro de pièce du fabricant (MPN)

552787

Fabricant d'équipement d'origine

FESTO

Description
Specification Details
Stroke 1 mm ... 200 mm
Piston diameter 12 mm
Piston rod thread M6
Based on standard ISO 6432
Cushioning Elastic cushioning rings/plates at both ends
Mounting position optional
Piston-rod end Male thread
Design Piston, Piston rod, Cylinder barrel
Position detection Via proximity switch
Variants Hard scraper, For unlubricated operation, Increased chemical resistance,
Extended male piston rod thread, Extended piston rod, Bearing cap without mounting thread,
Lateral supply port, Through piston rod, Heat-resistant seals max. 120°C,
Temperature range -40 to 80°C, Piston rod at one end
Operating pressure 0.1 MPa ... 1 MPa
1 bar ... 10 bar
Mode of operation Double-acting
CE mark To EU Explosion Protection Directive (ATEX)
UKCA marking To UK EX instructions
Explosion protection certification outside the EU EPL Db (GB), EPL Gb (GB)
Explosion protection Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX)
ATEX category gas II 2G
ATEX category dust II 2D
Explosion ignition protection type for gas Ex h IIC T4 Gb
Explosion ignition protection type for dust Ex h IIIC T120°C Db
Explosion ambient temperature -20°C ≤ Ta ≤ +60°C
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 3 - high corrosion stress
FESTO

552787 | FESTO | ISO Cylinder CRDSNU-12-100-P-A-MQ-A1

₹ 13,553.65
Specification Details
Stroke 1 mm ... 200 mm
Piston diameter 12 mm
Piston rod thread M6
Based on standard ISO 6432
Cushioning Elastic cushioning rings/plates at both ends
Mounting position optional
Piston-rod end Male thread
Design Piston, Piston rod, Cylinder barrel
Position detection Via proximity switch
Variants Hard scraper, For unlubricated operation, Increased chemical resistance,
Extended male piston rod thread, Extended piston rod, Bearing cap without mounting thread,
Lateral supply port, Through piston rod, Heat-resistant seals max. 120°C,
Temperature range -40 to 80°C, Piston rod at one end
Operating pressure 0.1 MPa ... 1 MPa
1 bar ... 10 bar
Mode of operation Double-acting
CE mark To EU Explosion Protection Directive (ATEX)
UKCA marking To UK EX instructions
Explosion protection certification outside the EU EPL Db (GB), EPL Gb (GB)
Explosion protection Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX)
ATEX category gas II 2G
ATEX category dust II 2D
Explosion ignition protection type for gas Ex h IIC T4 Gb
Explosion ignition protection type for dust Ex h IIIC T120°C Db
Explosion ambient temperature -20°C ≤ Ta ≤ +60°C
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 3 - high corrosion stress
Voir le produit
Retour en haut