SPARECRUX is NOT an authorized distributor for FESTO
552787 | FESTO | ISO Cylinder CRDSNU-12-100-P-A-MQ-A1
₹ 15,993.31
₹ 13,553.65 (Excl. Tax)
لم نتمكن من تحميل توفر الاستلام
ضمان
نقدم ضمانًا لمدة عام واحد من تاريخ الشراء للمنتجات الجديدة. بالإضافة إلى ذلك، تأتي المنتجات الفائضة/المستعملة مع ضمان لمدة 30 يومًا .
التسليم والشحن
نهدف إلى معالجة الطلبات خلال ٥-٧ أيام عمل . تختلف خيارات الشحن باختلاف الموقع، مع توفير خدمة التتبع؛ الشحن الدولي متاح مع تحمل العميل مسؤولية الرسوم الجمركية.
552787 | FESTO | ISO Cylinder CRDSNU-12-100-P-A-MQ-A1
Hard scraper, For unlubricated operation, Increased chemical resistance,
Extended male piston rod thread, Extended piston rod, Bearing cap without mounting thread,
Lateral supply port, Through piston rod, Heat-resistant seals max. 120°C,
Temperature range -40 to 80°C, Piston rod at one end
Operating pressure
0.1 MPa ... 1 MPa 1 bar ... 10 bar
Mode of operation
Double-acting
CE mark
To EU Explosion Protection Directive (ATEX)
UKCA marking
To UK EX instructions
Explosion protection certification outside the EU
EPL Db (GB), EPL Gb (GB)
Explosion protection
Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX)
ATEX category gas
II 2G
ATEX category dust
II 2D
Explosion ignition protection type for gas
Ex h IIC T4 Gb
Explosion ignition protection type for dust
Ex h IIIC T120°C Db
Explosion ambient temperature
-20°C ≤ Ta ≤ +60°C
Operating medium
Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium
Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC
3 - high corrosion stress
عربة التسوق الخاصة بك
FESTO
552787 | FESTO | ISO Cylinder CRDSNU-12-100-P-A-MQ-A1
₹ 13,553.65
سعر الوحدة /
غير متاح
Specification
Details
Stroke
1 mm ... 200 mm
Piston diameter
12 mm
Piston rod thread
M6
Based on standard
ISO 6432
Cushioning
Elastic cushioning rings/plates at both ends
Mounting position
optional
Piston-rod end
Male thread
Design
Piston, Piston rod, Cylinder barrel
Position detection
Via proximity switch
Variants
Hard scraper, For unlubricated operation, Increased chemical resistance,
Extended male piston rod thread, Extended piston rod, Bearing cap without mounting thread,
Lateral supply port, Through piston rod, Heat-resistant seals max. 120°C,
Temperature range -40 to 80°C, Piston rod at one end
Operating pressure
0.1 MPa ... 1 MPa 1 bar ... 10 bar
Mode of operation
Double-acting
CE mark
To EU Explosion Protection Directive (ATEX)
UKCA marking
To UK EX instructions
Explosion protection certification outside the EU
EPL Db (GB), EPL Gb (GB)
Explosion protection
Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX)
ATEX category gas
II 2G
ATEX category dust
II 2D
Explosion ignition protection type for gas
Ex h IIC T4 Gb
Explosion ignition protection type for dust
Ex h IIIC T120°C Db
Explosion ambient temperature
-20°C ≤ Ta ≤ +60°C
Operating medium
Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium
Lubricated operation possible (in which case lubricated operation will always be required)
